Cold Steel 4-Max Elite Folding Knife – CPM S35VN, G-10 & Tri-Ad Lock
Cold Steel 4-Max Elite – Massive Premium Pocket Knife with CPM S35VN
The Cold Steel 4-Max Elite is a large-sized and particularly robustly constructed pocket knife, developed in collaboration with renowned knifemaker Andrew Demko.
At its heart is the approximately 10.2 cm long drop-point blade made from CPM S35VN. This powder metallurgical knife steel combines high edge retention, toughness, and good corrosion resistance, and is often used in high-quality utility knives.
With an overall length of approximately 25.4 cm, a blade thickness of approximately 4.8 mm, and a weight of around 286 g, the 4-Max Elite is one of Cold Steel's particularly robustly dimensioned folding knives.
CPM S35VN – High-Quality Powder Metallurgical Blade Steel
The wide drop-point blade is made from CPM S35VN and features a stonewash finish. CPM S35VN is a powder metallurgical stainless steel developed for a balanced combination of edge retention, toughness, corrosion resistance, and ease of sharpening.
The stonewash finish gives the blade a subtle, matte surface and can make minor signs of use appear less noticeable.
Extra Wide Drop-Point Blade
The wide drop-point geometry offers a robust blade tip and a versatile cutting edge. This makes the knife suitable for numerous permissible cutting tasks in outdoor, leisure, and work environments.
G-10 Handle with Stable Construction
The approximately 15.2 cm long handle features 3D-machined G-10 scales. G-10 is a fiberglass-reinforced composite material used in high-quality knives due to its dimensional stability and durability.
The pronounced handle contour supports a controlled grip, even with the relatively high weight and generous dimensions of the 4-Max Elite for a pocket knife.
Tri-Ad Lock by Andrew Demko
To lock the open blade, Cold Steel uses the Tri-Ad Lock developed by Andrew Demko. This locking system is based on a modified back-lock principle and is designed to distribute applied loads within the construction.
As with any folding knife, it should be checked before use that the blade is fully locked. No lock can guarantee complete protection against unintentional closing or injury if used improperly.
Ambidextrous Thumb Stud
The blade features an ambidextrous thumb stud, allowing it to be opened according to the user's preference.
Pocket and Belt Clip
A clip allows the closed knife to be attached to suitable equipment or clothing. When carrying and using, the applicable legal provisions must be observed.
Technical Specifications
- Manufacturer: Cold Steel
- Model: 4-Max Elite
- Designer: Andrew Demko
- Knife Type: Folding Knife / Pocket Knife
- Blade Shape: Drop Point
- Blade Material: CPM S35VN
- Blade Finish: Stonewash
- Blade Length: approx. 10.2 cm
- Blade Thickness: approx. 4.8 mm
- Overall Length: approx. 25.4 cm
- Handle Length: approx. 15.2 cm
- Handle Material: G-10
- Locking Mechanism: Tri-Ad Lock
- Opening: Thumb Stud
- Clip: Pocket/Belt Clip
- Weight: approx. 286 g
For Collectors, Outdoor Enthusiasts, and Knife Enthusiasts
The Cold Steel 4-Max Elite is particularly aimed at users who are looking for an exceptionally large-sized folding knife with high-quality materials. The combination of CPM-S35VN blade, G-10 handle, robust construction, and Tri-Ad Lock also makes this model interesting for collectors and Cold Steel enthusiasts.
Legal Notice for Germany
Please note: The Cold Steel 4-Max Elite has a one-hand opening and lockable blade. For carrying such one-hand knives in Germany, the provisions of § 42a WaffG (Weapons Act) must be observed in particular.
Carrying a knife with a one-hand lockable blade is generally restricted. Legally provided exceptions may exist, for example, when transporting it in a closed container or if there is a legitimate interest. In addition, special regulations apply, among other things, at public events, in certain prohibited zones, and in long-distance public transport.
Legal provisions can change and be supplemented by additional regional regulations. The buyer is responsible for observing the regulations applicable to their location of residence and use.
Safety Instructions
This product has a sharp blade and can cause severe cuts and stab wounds if handled improperly or carelessly.
- Never point the blade at people or animals.
- Keep fingers out of the blade's range of motion when opening and closing.
- Before use, check the proper condition of the knife and the lock.
- Do not continue to use if damaged or if functional defects are apparent.
- Keep out of reach of children.
- Use only for legally permissible purposes.
- Observe the applicable legal regulations regarding possession, transport, and carrying.
Direct Shipping by Our Partner
This product will be shipped directly to you by our specialized partner. This means shipping will occur immediately from the respective partner warehouse.
Your order will still be placed through Fightwood. Fightwood remains your contact for your order. Your legal consumer and warranty rights are not restricted by direct shipping.
Frequently Asked Questions about the Cold Steel 4-Max Elite
What blade steel does the Cold Steel 4-Max Elite use?
The blade is made from CPM S35VN. This is a powder metallurgical stainless steel that offers a balanced combination of edge retention, toughness, corrosion resistance, and ease of sharpening.
How long is the blade of the Cold Steel 4-Max Elite?
The drop-point blade is approximately 10.2 cm or 4 inches long. The overall length of the open knife is approximately 25.4 cm.
How thick is the blade?
The blade has a thickness of approximately 4.8 mm, making it comparatively robust for a pocket knife.
What is the Tri-Ad Lock?
The Tri-Ad Lock is a locking mechanism developed by Andrew Demko based on a modified back-lock concept. It serves to mechanically lock the open blade and distribute applied loads within the construction.
What material is the handle made of?
The 4-Max Elite features G-10 handle scales. This fiberglass-reinforced composite material is often used for high-quality knife handles due to its durability and dimensional stability.
How much does the Cold Steel 4-Max Elite weigh?
The knife weighs approximately 286 g, making it one of the larger and heavier pocket knives.
Is the Cold Steel 4-Max Elite a one-hand knife?
The model features a thumb stud for one-hand opening and a lockable blade. Therefore, in Germany, the regulations for one-hand knives according to § 42a WaffG must be observed in particular.
Am I allowed to carry the Cold Steel 4-Max Elite in Germany?
For knives with a one-hand lockable blade, restrictions apply in Germany regarding carrying. Legally provided exceptions exist under certain conditions, for example, for transport in a closed container or if there is a legitimate interest. Additionally, further knife bans may apply. Please inform yourself about the currently applicable legal and local regulations before transporting or carrying it.
Is a pocket clip included?
Yes. The Cold Steel 4-Max Elite is equipped with a pocket or belt clip.
Who ships the Cold Steel 4-Max Elite?
The product is shipped directly by a specialized partner of Fightwood. The order is still placed through Fightwood, and your legal consumer and warranty rights are not restricted by direct shipping.